Banggood Enjoywood Set Up Block Drawer Tray 3D Print file.

£0.00

These set up blocks come in a handy box but I found that a little cumbersome so here is a tray that can be used to store them in a drawer.

There are 2 files, one shallow and one a little deeper.

The shallow one is a little wobbly so if you have a sticky drawer I recommend the deeper one.

Standard print settings are fine, 3 walls and 15% infill.

PLA and PETG have worked just fine.

If you want to check the blocks out there is a link below.

These set up blocks come in a handy box but I found that a little cumbersome so here is a tray that can be used to store them in a drawer.

There are 2 files, one shallow and one a little deeper.

The shallow one is a little wobbly so if you have a sticky drawer I recommend the deeper one.

Standard print settings are fine, 3 walls and 15% infill.

PLA and PETG have worked just fine.

If you want to check the blocks out there is a link below.